Health and Safety Summary

Handling Precautions

This material is for industrial use only, and requires professional equipment and experience for safe handling and is not intended for use by the general public. Material Safety Data Sheets (MSDS) are published and available, and it is the responsibility of the applicator to be aware of the information contained therein.

This product is harmful or fatal if swallowed. Harmful and/or irritating if material or vapors are absorbed through the skin. Keep away from heat, open flame and sparks. Use necessary safety equipment, including air fed respirators if spraying, non-sparking tools, ladders, shoes, explosion proof electrical equipment meeting National Electrical Standards etc.

All handling of both parts of FPU coating must be carried out under working conditions that prevent skin contact or inhalation of vapors. For example: Wear impervious gloves and goggles in a spray ventilated booth fitted with an effective filtered exhaust system, complying with all local regulations applicable to spray painting. The operator must wear a positive pressure, air supplied full-face respirator and gloves while spraying, and until all spray mist has been dispersed. The spray booth area should be isolated from other people while spraying is in progress until all spray mist has been effectively dispersed. Do not use dust respirators.

Improper use and handling of this product can be hazardous to your health. Consult all regulations concerning occupational health and safety practices with regards to paint coatings. Appropriate safety equipment should be used and ventilation requirements must be carefully observed, especially in confined areas to prevent the concentration of vapors. Please follow all directions and warnings completely and carefully otherwise do not use this product

Storage & Handling

Hazardous Goods: Paint, Flammable Liquid, UN1263 Class III Hazchem 3YE
Shipping information: 8.30 Kg/ 18.25 lb.�s per Unit inch container - White
6.76 Kg/ 14.9 lb.�s per Unit inch container - Clear VOC content 335 grams per liter - White
419 grams or 335 grams per liter - Clear Flash point (Seta flash) 34 deg C / 93 deg F

Storage - FPU Coatings must be stored and handled in compliance with all current local regulations applying to flammable, or highly flammable liquids. Store in cool, dry protected storage, well ventilated, at between 5 - 35 deg C / 40 - 95 deg F and out of direct sunlight, moisture or rain. Maintain unmixed material in sealed containers at all times.

Shelf Life - FPU has a minimum shelf life of 12 months from the date of manufacture if stored as indicated above, unopened in sealed containers. Ensure both components are consistent in appearance and thickness after stirring, and ensure that the activator (Part B) is clear and transparent before mixing the components together. Do not use activator that is not visually clear.